Login       My Wishlist
  My Cart
$0.00 / 0 items
 
Drakes Door
Door Supplies and Hardware
 
International Access
Global Shipping Options Available
  Our Catalog   Hardware   Furniture Hardware

Double Sliding Barn Door Hardware Kit with 10 Ft. Track Included - Made in USA


Double Sliding Barn Door Hardware Kit with 10 Ft. Track Included - Made in USA by Mapp Caster at Drakes Door. MPN: BarnDK10Dual. Hurry! Limited time offer. Offer valid only while supplies last. This Double Sliding Barn Door kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides


Product Description

This Double Sliding Barn Door kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four looped hangers with 3" cast iron wheel - Hanger Length is 14" total and 10" from wheel base to end of hanger and 1.5" wide x 3/16" thick. The holes to attach to the door are located 1" and 6.5" from the bottom of the hanger; 10 foot length track (overall length is 10'4" to accommodate end bumpers) of 1.5" wide x 3/16" thick steel track; 1-5/8" length spacers that hold the track off the wall; Washers that go between the spacers and the wall; 5/16" x 4.5" Lag bolts to attach the track to the wall; 5/16" x 1-1/2" lag bolts to attach the hangers to the door; Two 2" x 2" angle iron end stops; 2 safety anti-jump clips to prevent possible derailment and bolts to attach; Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us). *All Lengths of track 7 feet and over will come in two pieces with splice kit included **The track is not predrilled to allow you to drill holes at the necessary locations. ***Hardware works with doors of 1-1/4" to 2-1/4" thickness. Basic installation instructions will be included and other helpful hints can be found online.

Features & Highlights

  • All Parts & Instuctions Needed to Hang Barn Door - Including 10 Foot Track
  • Hardware is raw steel and ready to paint or leave unfinished for a rustic look - Made From Quailty Steel in the USA
  • General Rule: Track length needs to be double the size of the door
  • Hardware works with doors of 1-1/4" to 2-1/4" Thickness; Track hangs 1-11/16" off wall - A backer board might be necessary depending on setup
  • Track will come in two pieces with splice kit included

Additional Information

Manufacturer:Mapp Caster
Brand:Mapp Caster
Part Number:BarnDK10Dual
Publisher:Mapp Caster
Studio:Mapp Caster
MPN:BarnDK10Dual
UPC:798154033943
EAN:0798154033943

Double Sliding Barn Door Hardware Kit with 10 Ft. Track Included - Made in USA by Mapp Caster

Buy Now:
Double Sliding Barn Door Hardware Kit with 10 Ft. Track Included - Made in USA

Brand: Mapp Caster
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$235.00


Quantity:  

 


View More In Furniture Hardware.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Mapp Caster, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:



Privacy Policy / Terms of Service
© 2018 - drakesdoor.org. All Rights Reserved.