Login       My Wishlist
  My Cart
$0.00 / 0 items
 
Drakes Door
Door Supplies and Hardware
 
International Access
Global Shipping Options Available
  Our Catalog   Hardware   Furniture Hardware

Sliding Barn Door Hardware Kit Flat Strap Design with 11 Ft. Track Included - Made in USA


Sliding Barn Door Hardware Kit Flat Strap Design with 11 Ft. Track Included - Made in USA by Mapp Caster at Drakes Door. MPN: Barndoorkit11-Flat3. Hurry! Limited time offer. Offer valid only while supplies last. This sliding interior barn door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything


Product Description

This sliding interior barn door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Two Flat Strap hangers with 3" cast iron wheel - Hanger Length is 12-1/4" total and 9-1/4" from wheel base to end of hanger and 2.5" wide x 3/16" thick. The holes to attach to the door are located 1" and 5" from the bottom of the hanger; 11 foot length track (overall length is 11'4" to accommodate end bumpers) of 1.5" wide x 3/16" thick steel track; 1-5/8" length spacers that hold the track off the wall; Washers that go between the spacers and the wall; 5/16" x 4.5" Lag bolts to attach the track to the wall; 5/16" x 1-1/2" lag bolts to attach the hangers to the door; Two 2" x 2" angle iron end stops; 2 safety anti-jump clips to prevent possible derailment and bolts to attach; Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us). *Track will come in two pieces with splice kit included **The track is not predrilled to allow you to drill holes at the necessary locations. ***Hardware works with doors of 1-1/4" to 2-1/4" thickness. Installation instructions will be included and other helpful hints can be found online.

Features & Highlights

  • All Parts & Instuctions Needed to Hang Barn Door - Including 11 Foot Track
  • Hardware is RAW STEEL (Grey/Silver) and ready to paint or leave unfinished for a rustic look - Made From Quailty Steel in the USA
  • General Rule: Track length needs to be double the size of the door
  • Hardware works with doors of 1-1/4" to 2-1/4" Thickness; Track hangs 1-11/16" off wall - A backer board might be necessary depending on setup
  • Track will come in two pieces with splice kit included

Additional Information

Manufacturer:Mapp Caster
Brand:Mapp Caster
Part Number:Barndoorkit11-Flat3
Publisher:Mapp Caster
Studio:Mapp Caster
MPN:Barndoorkit11-Flat3

Sliding Barn Door Hardware Kit Flat Strap Design with 11 Ft. Track Included - Made in USA by Mapp Caster

Buy Now:
Sliding Barn Door Hardware Kit Flat Strap Design with 11 Ft. Track Included - Made in USA

Brand: Mapp Caster
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$182.00


Quantity:  

 


View More In Furniture Hardware.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Mapp Caster, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


By Bumper Specialties, Inc.
mpn: BS-18 White, ean: 0045635229648,
Adhesive backed polyurethane bumper pads, sized .500" inches (12.7 mm) x .140" inches (3.5 mm). This box contains 5,000 cylindrical protective rubber bumper feet. These polyurethane bumper stops protect surfaces from many types of damage. We are the ...

By Mapp Caster
mpn: BarnDK5Dual-Flat3,
This Double Sliding Barn Door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four Flat Strap hangers wi...

By Mapp Caster
mpn: Barndoorkit7-Flat3,
This sliding interior barn door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Two Flat Strap hangers w...

By Mapp Caster
mpn: Barndoorkit8-Flat3,
This sliding interior barn door Flat Strap style kit is our most popular length and is perfect for anyone looking to install a DIY barn door. The parts included are as follows: Two Flat Strap hangers with 3" cast iron wheel - Hanger Length is 12-1/4"...

By Mapp Caster
mpn: Barndoorkit12,
This sliding interior barn door kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Two looped hangers with 3" cast iron whee...

By KidKusion
mpn: 6501, ean: 0731900065010,
Protect your child from falls against the fireplace hearth with our large soft seat hearth pad. This product also doubles as additional seating in your home. The pad measures 13.5" deep to turn your hearth into a soft safe seat for family and guests....

By Bumper Specialties, Inc.
mpn: BS-17 Black, ean: 0045635229587,
Adhesive backed polyurethane bumper pads, sized .500" inches (12.7 mm) x .140" inches (3.5 mm). This box contains 5,000 cylindrical protective rubber bumper feet. These polyurethane bumper stops protect surfaces from many types of damage. We are the ...

By Mapp Caster
mpn: Barndoorkit11-TStrap3,
This sliding interior barn door T-Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Two T-Strap hangers with 3"...

By Mapp Caster
mpn: BarnDK7Dual-Flat3,
This Double Sliding Barn Door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four Flat Strap hangers wi...

By Mapp Caster
mpn: BarnDK12Dual-Flat3,
This Double Sliding Barn Door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four Flat Strap hangers wi...



Privacy Policy / Terms of Service
© 2018 - drakesdoor.org. All Rights Reserved.