Sliding Barn Door Hardware Kit Flat Strap Design with 5 Ft. Track Included - Made in USA

This sliding interior barn door Flat Strap style kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Two Flat Strap hangers with 3" cast iron wheel - Hanger Length is 12-1/4" total and 9-1/4" from wheel base to end of hanger and 2.5" wide x 3/16" thick. The holes to attach to the door are located 1" and 5" from the bottom of the hanger. Five foot length track (overall length is 5'4" to accommodate end bumpers) of 1.5" wide x 3/16" thick steel track; 1-5/8" length spacers that hold the track off the wall; Washers that go between the spacers and the wall; 5/16" x 4.5" Lag bolts to attach the track to the wall; 5/16" x 1-1/2" lag bolts to attach the hangers to the door; Two 2" x 2" angle iron end stops; 2 safety anti-jump clips to prevent possible derailment and bolts to attach; Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us). The track is not predrilled to allow you to drill holes at the necessary locations. Hardware is raw steel and ready to paint or leave unfinished for a rustic look. Installation instructions will be included and other helpful hints can be found online. *Hardware works with doors of 1-1/4" to 2-1/4" thickness.