Yonico 12131 2-1/2" Diameter Cove Raised Panel Router Bit with 1/2" Shank
Yonico 12131 2-1/2'' Diameter Cove Raised Panel Router Bit with 1/2'' Shank by Yonico at Drakes Door. MPN: 12131. Hurry! Limited time offer. Offer valid only while supplies last. This 2-1/2'' cove panel raiser has a cutting depth of 1'' and a total cutting height of 7/16'' which includes a 1/8'' fillet. This bit can cut panels for
This 2-1/2" cove panel raiser has a cutting depth of 1" and a total cutting height of 7/16" which includes a 1/8" fillet. This bit can cut panels for door frames with grooves of up to 3/8" deep. This bit features thick carbide cutters and a 1/2" shank. Use a raised panel router bit to reduce the thickness of the center panel of rail and stile doors while at the same time adding a beautiful profile to the edge. Install one of these bits in your Table mounted router and route your panels face down. Raised panel router bits have a large diameter and remove a lot of material, so make sure you have a router with enough Horsepower to handle this kind of work. All standard raised panel bits are fitted with Radial bearings to make adjustment of the router Table fence easy. Do not use these bits in handheld routers. If you are using stock that is very thick, choose one of our raised panel router bits with a backcutter blade. These will remove excess stock from the back of the panel as well.
Features & Highlights
- This 2-1/2" Cove panel raiser has a cutting depth of 1" and a Total cutting height of 7/16"
- For use in table mounted routers to easily cut the front profile of your cabinet door center panels in solid wood or MDF
- Industrial radial guide bearing for easy operation and depth stop
- Premium quality C3 Micro-grain Carbide Cutters with Silver induction brazing for maximum strength
- Satisfaction Guaranteed & limited lifetime warranty
|Item Weight:||0.33 pounds|
|Item Size:||2.5 x 2.5 x 2.5 inches|
|Package Weight:||0.53 pounds|
|Package Size:||4.3 x 2 x 2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Yonico, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: M1550, ean: 0745780110555,
Set includes 8 carbon steel hole saws, 2 arbors with pilot drill and Allen key. Hole saw sizes: 3/4" - 19mm, 7/8"- 22mm, 1 1/8"-28mm, 1 1/4"- 32mm, 1 1/2"-38mm, 1 1/3"- 44mm, 2"- 51mm, 2 1/2"- 64mm Package Included: 1x Hole Saw Set(11Pcs) 1x CaseBran...
mpn: A99DLK1, ean: 0033287147502,
mpn: Unbranded, ean: 0703062577519,
For Sale: 50 New clear vinyl bumpers. Come on a sheet of 50 with self adhesive backing. Just peel and stick where you need them. These measure about 1/2 inches on the bottom and taper down to 3/8 inches on the top. They are about 1/8 inches thick. Th...
mpn: GDL-TS, ean: 0032167901258,
B'laster - GDL-TS - Garage Door Lube - 5-Ounces has been formulated to replace messy aerosol grease products typically used on overhead doors, rollers and tracks, wires, rope, etc. It incorporates the lubrication and lasting protection of silicone wi...
By Vermont American
mpn: 18602, ean: 0045325186022,
18602 Features: -Carded. -For all types of door locks. -Kit includes 2.5" carbon hole saw, 1" spade bit, mandrel, 0.09" Allen wrench, 1" wood chisel, 0.16" pilot drill, and centering template. Product Type: -Screwdriver Bits. Use: -Drill Bits. Dimens...
mpn: 12536, ean: 0765573825480,
Make professional and beautiful raised panel cabinet doors with this 5 piece router bit set. Included in this set is an Ogee Panel Raiser Bit, 2 bit Matched Round-over Rail & Stile and Reversible Glue Joint Bit for extending panel widths. Also includ...
mpn: DRILLPROxS3cse43T, ean: 6166440236530,
Tongue and Groove Set - Suitable for woods, mdf, particle board, plywood compact panel, avoid cutting ferrous metal and non wood materials, such as: Steel, iron, sand, etc. Feature: Tongue and Groove set Produces strong, long-lasting joints for gluin...
mpn: Promisy008, ean: 0782123552498,
Features: Shank: 1/2 Inch Package include: 1x Router bit Maintenance Keep the tool clean, clean up the resin, sawdust and other contaminants. Apply a small amount of oil to prevent rust on the tool surface, cleaning tool handle stains, In order to p...
By Amana Tool
mpn: 49530, ean: 0738685095300,
Door Making Router Bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Cuts a decorative edge on cabinet fronts with Amana Tool 49530 Carbide Tipped Cabinet Door Edge - Front Face Edge 5/64 R x 1-1/4 D x 3/8 CH ...
mpn: 0718122603404, ean: 0718122603404,
2 flute, carbide-tipped. Ideal addition to any cabinet door set. Finish your door edges professionally in one pass. 1-1/2" Large Diameter, 15/16" Carbide Height. 1/2" Shank. For Stock Thickness 3/4" to 7/8".Quality Carbide-tipped Router Bit. Professi...